 |
Our Axle nut covers
are made from 6061-T6 Billet Aluminum. Polished and (SHOW)
Chromed! They are held in place with 2 Stainless Steel Knurled
cup pointed set screws. |
|
|
SBF-13
Click pic for larger view |
When
ordering, Select X, Y,
or Z
according to this chart >
Click Here for Fitment
Chart |
|
|
 |
(2)
Flat covers with a smooth front, chrome.
$39.95 set |
|
|
SBF-33
Click pic for larger view |
When
ordering, Select X, Y,
or Z
according to this chart >
Click Here for Fitment Chart |
|
|
 |
(2) Flat covers with '3' engraved on the front, chrome.
$59.95 set |
|
|
When
ordering, Select X, Y,
or Z
according to this chart >
Click Here for Fitment
Chart |
|
|
 |
(2)
Flat covers with '8' engraved on the front,
chrome. $59.95 set
|
|
SBF-SM
Click pic for larger view |
When
ordering, Select X, Y,
or Z
according to this chart >
Click Here for Fitment
Chart |
|
|
 |
(2)
Flat covers with Superman logo engraved on the front, chrome
$59.95 set
|
|
SBF-MC
Click pic for larger view |
When
ordering, Select X, Y,
or Z
according to this chart >
Click Here for Fitment
Chart |
|
|
 |
(2)
Flat covers with a Maltese Cross engraved on the front, chrome.
$59.95 set
|
|
SBS-25
Click pic for larger view |
When
ordering, Select X, Y,
or Z
according to this chart >
Click Here for Fitment
Chart |
|
|
 |
(2)
2.5 inch long spikes, chrome.
$54.95 set |
|
SBS-34
Click pic for larger view |
When
ordering, Select X, Y, or Z according to this chart >
Click Here for Fitment Chart |
|
|
 |
(2)
3.4 inch long spikes, chrome.
$59.95 set |
|
SBS-40
Click pic for larger view |
When
ordering, Select X, Y, or Z according to this chart >
Click Here for Fitment Chart |
|
|
 |
(2)
4 inch long spikes, chrome.
$64.95 set |
|
SBS-FX
(No stock till
5/20/08)
Click pic for larger view |
fits FXST Springer |
|
|
 |
(2) 1.5" dia. x 3" long axle spike (1 per side)
(4) 1.25" dia.x 2.5" long pivot bolt spikes (2 per side)
$109.95 |
|
|
|
SBF-SMR
Click pic for larger view |
|
Top
of Page |
|
|
Rear flat covers with Superman logo engraved, chrome.
$124.95 set |
|
SBF-MCSR
Click pic for larger view |
|
|
|
 |
Rear Softail® flat covers with Maltese cross engraved, chrome.
$124.95 set |
|
SBF-PR
Click pic for larger view |
|
|
|
 |
Rear flat covers, plain, chrome.
$99.95 set |
|
SBS-STR
Click pic for larger view |
Note: These covers will
not fit bikes with shotgun exhaust. |
|
|
 |
Rear
Softail® axle nut covers. These covers will not fit bikes with shotgun
exhaust.
$99.95 set |
|
|
|
DPE-MC
Click pic for larger view |
Fits
1996 and later Electra Glide FL models |
Top
of Page |
|
 |
Chrome
dash panel with Maltese cross engraving.
$85.00 |
|
DPE-95
Click pic for larger view |
Fits
1996 and later Electra Glide FL models |
|
 |
Chrome
dash panel with a '95' engraving.
$85.00 |
|
DPE-103
Click pic for larger view |
Fits
1996 and later Electra Glide FL models |
|
 |
Chrome
dash panel with a '103' engraving.
$85.00 |
|
DPE-P
Click pic for larger view |
Fits
1996 and later Electra Glide FL models |
|
 |
Chrome
dash panel with no engraving.
$67.50 |
|
 |
|
SBS-HBS
Click pic for larger view |
|
Top
of Page |
 |
Head bolt spikes, chrome 4 pc. set; (Evo & TC)
$49.95 |
|
|
|
TC-CUB
Click pic for larger view |
Covers fit 1999 and later Twin Cam Engines. |
Top
of Page |
|
 |
Chrome
timing cover with a 'Ciubs
Symbol' engraving.
$44.95 |
|
TC-C
Click pic for larger view |
Covers fit 1999 and later Twin Cam Engines. |
Top
of Page |
|
 |
Chrome
timing cover with a 'C' engraving.
$44.95 |
|
TC-RS
Click pic for larger view |
Covers fit 1999 and later Twin Cam Engines. |
Top
of Page |
|
 |
Chrome
timing cover with a 'Radio Active Skull' engraving.
$44.95 |
|
TC-G
Click pic for larger view |
Covers fit 1999 and later Twin Cam Engines. |
Top
of Page |
|
 |
Chrome
timing cover with a 'G' engraving.
$44.95 |
|
TC-17
Click pic for larger view |
Covers fit 1999 and later Twin Cam Engines. |
Top
of Page |
|
 |
Chrome
timing cover with a '17' engraving.
$44.95 |
|
TC-TG
Click pic for larger view |
Covers fit 1999 and later Twin Cam Engines. |
Top
of Page |
|
 |
Chrome
timing cover with a 'Trucker Girl' engraving.
$44.95 |
|
TC-SM
Click pic for larger view |
Covers fit 1999 and later Twin Cam Engines. |
Top
of Page |
|
 |
Chrome
timing cover with a 'Super Man' engraving.
$44.95 |
|
TC-3
Click pic for larger view |
Covers fit 1999 and later Twin Cam Engines. |
Top
of Page |
|
 |
Chrome
timing cover with a '3' engraving.
$59.95 |
|
TC-8
Click pic for larger view |
Covers fit 1999 and later Twin Cam Engines. |
|
 |
Chrome timing cover with a '8' engraving.
$59.95 |
|
TC-95
Click pic for larger view |
Covers fit 1999 and later Twin Cam Engines. |
|
 |
Chrome timing cover with a '95' engraving.
$44.95 |
|
TC-103
Click pic for larger view |
Covers fit 1999 and later Twin Cam Engines. |
|
 |
Chrome timing cover with a '103' engraving.
$44.95 |
|
TC-MC
Click pic for larger view |
Covers fit 1999 and later Twin Cam Engines. |
|
 |
Chrome timing cover with a
Maltese Cross engraving.
$44.95 |
|
 |
FLH windshield trim
CNC Machined from 304 Stainless Steel and polished to
a mirrored finish. These trim pcs. will defiantly set your
bike apart from the rest of the crowd! | |
|
SB-WT3B
Click pic for larger view |
Black Powder-Coated 6061 Billet Aluminum |
Top
of Page |
 |
3 barb windshield trim,
Black Powder-Coated; fits 1996 and later Electra Glide models.
$49.95 |
|
|
SB-WT5B
Click pic for larger view |
Black Powder-Coated 6061
Billet Aluminum |
Top
of Page |
 |
5 barb windshield trim,
Black Powder-Coated; fits 1996 and later Electra Glide models.
$49.95 |
|
|
SB-WT3
Click pic for larger view |
304 Stainless Steel |
Top
of Page |
 |
3 barb windshield trim; fits 1996 and later Electra Glide models.
$69.95 |
|
SB-WT5
Click pic for larger view |
304 Stainless Steel |
|
|
 |
5 barb windshield trim; fits 1996 and later Electra Glide models.
$69.95 |
|
|
|
SBW-4
Click pic for larger view |
|
Top
of Page |
|
 |
4” Polycarbonate windshield fits 1996 and later FLHT models, (available in smoked or black).
$35.95 |
|
SBW-5
Click pic for larger view |
|
|
|
|
 |
5"
Polycarbonate Windshield fits 1996 and later FLHT models
(available in smoked or black).
$35.95 |
|
SBW-7
Click pic for larger view |
|
|
|
|
 |
7"
Polycarbonate Windshield for 1996 and later FLHT models
(available in smoked only).
$40.95 |
|
SBW-9
Click pic for larger view |
|
|
|
|
 |
9"
Polycarbonate Windshield for 1996 and later FLHT models
(available in smoked only).
$45.95 |
|
|
|
SB-BR-MC
Click pic for larger view |
|
Top
of Page |
|
Backrest Not Included |
Maltese Cross - Customize your Harley
Davidson touring motorcycle backrest with one our 6061 billet aluminum
backrest mounting plates. These plates are CNC machined in our shop,
polished and chrome plated, and made to bolt directly onto your
backrest. This custom part will set your bike apart from all the rest.
Contact us for other available styles.
$89.95 |
|
SB-BR-SK
Click pic for larger view |
|
Top
of Page |
|
Backrest Not Included |
Skull - Customize your Harley
Davidson touring motorcycle backrest with one our 6061 billet aluminum
backrest mounting plates. These plates are CNC machined in our shop,
polished and chrome plated, and made to bolt directly onto your
backrest. This custom part will set your bike apart from all the rest.
Contact us for other available styles.
$89.95 |
|
SB-BR-POW
Click pic for larger view |
|
Top
of Page |
|
Backrest Not Included |
POW-MIA - Customize your Harley
Davidson touring motorcycle backrest with one our 6061 billet aluminum
backrest mounting plates. These plates are CNC machined in our shop,
polished and chrome plated, and made to bolt directly onto your
backrest. This custom part will set your bike apart from all the rest.
Contact us for other available styles.
$109.95 |
|
 |
High performance speakers and antennas
The finest sound on two wheels | |
HCUR06
Click pic for larger view |
High Performance Rear Speaker Upgrade
for 2006 and later Harley Ultra Classic |
Top
of Page |
|
 |
They have been designed specifically for the rear position on all 2006
and later Harley Electra Glide, “Ultra” Motorcycles and feature a full
fidelity range, waterproof, injection molded polycarbonate cone,
high-flux strength Neodymium magnet, and high efficiency voice coil.
Spec’d at 2 ohms impedance and 140+ watts power, you will be impressed
by the significant improvement in bass response, midrange clarity, audio
power and overall fidelity.
Their mounting hole pattern and spade electrical connections are exactly
the same as the factory specification, making replacement a snap.
$89.99 per pair |
|
HCUR98
Click pic for larger view |
High Performance Rear Speaker Up-Grade
for 1998 – 2005 Harley Electra/Road Glide “ULTRA” Models (only) |
Top
of Page |
|
 |
They have been designed
specifically for the rear position on all 1998 – 2005 Harley Electra
Glide or Road Glide “Ultra” Motorcycles and feature water-proof Mylar
dual-cone construction, high-flux strength Neodymium magnet and high
efficiency voice coil.
Spec’d at 8 ohms impedance and 140+ watts power, you will be impressed
by the significant improvement in audio power and fidelity.
Their mounting hole pattern is the same as the factory specification
making replacement a snap.
$79.99 per pair |
|
HCUS06GT
Click pic for larger view |
High Performance Fairing Speaker
Upgrade for 2006 and later Harley ElectraGlide |
Top
of Page |
|
 |
If you want to make the most
dramatic change possible to the music quality and audio power from your
fairing-mounted speakers, then replace the stock units with a set of our
high-performance models.
They have been designed specifically for the 2006 and later Harley®
Electra Glide/Ultra/Street Glide fairing and feature a waterproof
injection molded polycarbonate cone woofer , high-flux strength
Neodymium magnet, high efficiency voice coil and a replacement grill set
with mounted chrome tweeters.
Spec’d at 2 ohms impedance and 140+ watts power, you will be impressed
by the significant improvement in bass response, midrange clarity, audio
power and overall fidelity.
Their mounting hole pattern and spade electrical connections are exactly
the same as the factory specification, making replacement a snap.
$109.99 per pair |
|
HCUS98GT
Click pic for larger view |
High Performance Fairing Speaker
Upgrade for 1998 – 2005 Harley ElectraGlide |
Top
of Page |
|
|
If you want to make the most dramatic
change possible to the music quality and audio power from your
fairing-mounted speakers, then replace the stock units with a set of our
high-performance models.
They have been designed specifically for the 1998 - 2005 Harley Electra
Glide/Ultra fairing and feature a waterproof injection molded
polycarbonate cone woofer , high-flux strength Neodymium magnet, high
efficiency voice coil and a replacement grill set with mounted chrome
tweeters.
Spec’d at 8 ohms impedance and 140+ watts power, you will be impressed
by the significant improvement in bass response, midrange clarity, audio
power and overall fidelity.
Their mounting hole pattern and spade electrical connections are exactly
the same as the factory specification, making replacement a snap.
$109.99 per pair |
|
HRUS06GT
Click pic for larger view |
High Performance Fairing Speaker
Upgrade for 2006 and later Harley RoadGlide |
Top
of Page |
|
 |
If you want to make the most
dramatic change possible to the music quality and audio power from your
fairing-mounted speakers, then replace the stock units with a set of our
high-performance models.
They have been designed specifically for the 2006 and later Harley
RoadGlide fairing and feature a waterproof injection molded
polycarbonate cone woofer , high-flux strength Neodymium magnet, high
efficiency voice coil and a replacement grill set with mounted chrome
tweeters.
Spec’d at 2 ohms impedance and 140+ watts power, you will be impressed
by the significant improvement in bass response, midrange clarity, audio
power and overall fidelity.
Their mounting hole pattern and spade electrical connections are exactly
the same as the factory specification, making replacement a snap.
Your satisfaction is guaranteed.
$109.99 per pair |
|
HRUS98GT
Click pic for larger view |
High Performance Fairing Speaker
Upgrade for 1998 – 2005 Harley RoadGlide |
Top
of Page |
|
 |
If you want to make the most
dramatic change possible to the music quality and audio power from your
fairing-mounted speakers, then replace the stock units with a set of our
high-performance models.
They have been designed specifically for the 1998 – 2005 Harley
RoadGlide fairing and feature a waterproof injection molded
polycarbonate cone woofer, high-flux strength Neodymium magnet, high
efficiency voice coil and a replacement grill set with mounted chrome
tweeters.
Spec’d at 8 ohms impedance and 140+ watts power, you will be impressed
by the significant improvement in bass response, midrange clarity, audio
power and overall fidelity.
Their mounting hole pattern and spade electrical connections are exactly
the same as the factory specification, making replacement a snap.
Your satisfaction is guaranteed.
$109.99 per pair |
|
HRUPARL
Click pic for larger view |
1 FT CB or AM/FM Ant Staff Upgrade
1989-2008 Harley Rail Mount ONLY |
Top
of Page |
|
 |
At just over 1 foot in length,
these replacement staffs have been designed specifically for the Harley
CB radio (pre-tuned for the CB, NO-SWR adjustment necessary) and also
the Harley AM/FM portion of the audio system (same antenna) for the
lower rail (inside saddlebag) mounting position ONLY.
These antennas will fit the Harley lower rail mounted antenna studs for
years 1989-2008 as original equipment on all Baggers, StreetGlides and
RoadGlides (without tail trunk).
No other shorty-style antenna on the market today has been engineered to
perform as well or better than the factory Harley antennas, like this
new antenna from J&M.
Installation is a snap as you just loosen the set screw on the factory
Harley antenna, unscrew it from the mounting stud, screw on the new J&M
antenna and re-tighten the Allen set screw.
These antennas are covered by J&M’s two year warranty and will provide
you with years of trouble free service.
$39.99 |
|
HRUPATM
Click pic for larger view |
1 FT CB or AM/FM Ant Staff Upgrade
1989-2008 Harley Trunk Mount ONLY |
Top
of Page |
|
 |
At just over 1 foot in length,
these replacement staffs have been designed specifically for the Harley
CB radio cable/load system (pre-tuned for the CB, NO-SWR adjustment
necessary) and also the Harley AM/FM portion of the audio system (same
antenna) for the tail-trunk mounting position ONLY.
These antennas will fit the Harley tail trunk mounted antenna studs for
years 1989-2008 as original equipment on all dressers, Ultras and
RoadGlides.
No other Shorty-style antenna on the market today has been engineered to
perform as well or better than the factory Harley antennas, like this
new antenna from J&M.
Installation is a snap as you just loosen the set screw on the factory
Harley antenna, unscrew it from the mounting stud, screw on the new J&M
antenna and re-tighten the Allen set screw.
These antennas are covered by J&M’s two year warranty and will provide
you with years of trouble free service.
$39.99 |
|
|
|
KP-BILLET
Click pic for larger view |
Click to read more...
When ordering, select 'S4,
S10, or S12' from the
fitment chart here |
|
 |
Plain Billet Finish The
most technically advanced oil filter you can buy - Clean it and re-use
it.
Helps reduce your impact on the environment and dissipates heat too.
$147.50 |
|
KP-ANODIZED
Click pic for larger view |
Click to read more...
When ordering, select 'S4,
S10, or S12' from the
fitment chart here |
|
 |
Black Anodized Finish The
most technically advanced oil filter you can buy - Clean it and re-use
it.
Helps reduce your impact on the environment and dissipates heat too.
$152.50 |
|
KP-CHROME
Click pic for larger view |
Click to read more...
When ordering, select 'S4,
S10, or S12' from the
fitment chart here |
|
 |
Chrome Finish The
most technically advanced oil filter you can buy - Clean it and re-use
it.
Helps reduce your impact on the environment and dissipates heat too.
$172.50 |
|
KP-DIAMOND
Click pic for larger view |
Click to read more...
When ordering, select 'S4,
S10, or S12' from the
fitment chart here |
|
 |
Diamond Cut Finish The
most technically advanced oil filter you can buy - Clean it and re-use
it.
Helps reduce your impact on the environment and dissipates heat too.
$172.50 |
|
KP-POLISHED
Click pic for larger view |
Click to read more...
When ordering, select 'S4,
S10, or S12' from the
fitment chart here |
|
 |
Polished Aluminum Finish
The most technically advanced oil filter you can buy - Clean it and
re-use it.
Helps reduce your impact on the environment and dissipates heat too.
$172.50 |
|
 |
PURE
POWER! LIFETIME OIL FILTER FOR HARLEY-DAVIDSON MOTORCYCLES
Pure Power Lifetime Oil Filter Is a CLEANABLE,
REUSABLE Direct Spin-on Replacement for the Harley-Davidson O.E.M.
Oil Filter. Testing at SwRI showed a 90% Improvement in Particle
Removal over paper "throw away" filters. Cleaner motor oil provides
for longer engine life, extended oil Change intervals, Cooler
Operating Temperatures, increased horsepower, improved fuel mileage,
and lower emissions. No need to buy another oil filter for your
motorcycle and no filter disposal charges. No modifications are
required and installation of the filter takes less than 5 minutes.
Easy to install (No special tools needed), Easy Monitoring of the
engine (simply unscrew the canister), Easy Cleaning (Parts vat or
hot soapy water). | |
SB-8110
Click pic for larger view |
Pure Power Lifetime Oil Filter |
Top
of Page |
|
 |
Add up to 9 HP and up 9.5 LB-FT
of Torque with your next oil change!
The Pure Power filter has a 1 inch hex fitting on the top for easy
removal.
The machined fins on the filter almost double the surface area,
eliminating the need for an external oil cooler.
$199.95 |
|
CORS
Click pic for larger view |
The
Contaminated Oil Removal System |
Top
of Page |
|
 |
The
Contaminated Oil Removal System
Can be used every time you change your oil.
Works on both EVO's® and Twin Cam's®
Helps extend the life of your engine and only takes minutes.
$19.95 |
|
 |
NO WATER SPOTS! NO MORE LEAF BLOWERS OR COMPRESSORS! MORE RIDING TIME!
The Blaster is the hottest new motorcycle care product to come out in decades and completely safe for all paint and chrome finishes.
"Test drive" the Air Force Blaster motorcycle dryer. It is the fastest and easiest way to dry bikes and I am sure you will be impressed with its power and performance. SATISFACTION GUARANTEED" | |
SK-1
Click pic for larger view |
All-steel Blaster® SideKick™ |
Top
of Page |
|
 |
For riders who want an affordable, high-quality, high-performance, American-made, super-compact portable, Metro is proud to introduce the all-new, all-steel Blaster® SideKick™! It features a powerful 1.3 HP motor that pumps out 18,000 feet-per-minute of warm (25-30 degrees above ambient) filtered air that will thoroughly dry a full-size road bike in minutes. Yet, at a mere 9.5" high and weighing just a hair over three lbs., the SideKick™ is small enough and light enough to ride comfortably in a saddlebag. Read More....
$89.99 |
|
|
B3-CD
Click pic for larger view |
The Metro Air Force Blaster Motorcycle Dryer |
|
 |
The Metro Air Force Blaster Motorcycle Dryer was specifically designed for cleaning and drying motorcycles with dry, filtered warm air (about 20-25 degrees above ambient temperature). The Metro Air Force Blaster will cut cleaning time by 80%! The Air Force Blaster is the quickest and most efficient method to dry motorcycles thoroughly and eliminates water spots. Five to seven minutes is all it takes to quickly and effectively dry motorcycles. Read More....
$189.99 |
|
MB-3CD
Click pic for larger view |
The AirForce
Master Blaster Motorcycle Dryer |
|
 |
The AirForce Master Blaster Motorcycle Dryer features a total of 8 peak horsepower. Two twin fan, 4.0 Peak horsepower motors that deliver up to 58,500 feet per minute of clean, filtered, warm airflow. Two switches allow users to set the airflow and temperature at 3 different levels. Use either motor (front or rear) independently or both simultaneously for maximum power. Five different nozzles enable users to position airflow where desired and eliminate water spots. Read More....
$349.99 |
|
 |
We are an authorized Bub
Dealer.
We will match any advertised price.
Call for your application and pricing - (847) 680-2266 -
Extention 2, then press the '#' sign |
|
SB1801-0190
Click pic for larger view |
BUB 7 Dual-Position Slip-On Mufflers for '95-09 FL Models
Click to see installed |
Top of Page |
 |
BUB 3-1/2" SLIP-ON MUFFLERS
BUB 7 slip-on mufflers feature one-piece muffler housings
with tapered inlets for easy installation. 3½" muffler bodies with
slash-cut billet aluminum end caps align perfectly to the rear end of
the saddlebags. They offer impressive mid-range and top end performance.
They feature Adjustable Slash-Cut Tip — The slash can be fixed in the
upward or downward position (shown).
EXHAUST FITS THE FOLLOWING FL MODELS: FLHR Road Kings, FLHRC Road King
Customs, FLHRS, FLHT Electra Glide Standards, FLHTC Electra Glide
Classics, FLHTCH, FLHX, FLR
Suggested retail $531.95, JP cycles price $479.69
Our BUB price: $469.95 FREE
SHIPPING (LOWER 48) |
|
 |
THESE LINERS "FIT LIKE A GLOVE"....They are a molded fit.
They are considerably larger than OEM HD liners and give you many more features for the money! | |
|
Saddle Bags |
SBL-200
Click pic for larger view |
|
Top
of Page |
|
 |
Standard Saddle Bag Liner Set measuring 11(h)x20(l)x6(d) Read More....
$44.95 |
|
SBL-300
Click pic for larger view |
|
|
|
 |
Road King Classic Liner Set measuring 11(h)x21(l)x6(d) Read More....
$44.95 |
|
SBL-400
Click pic for larger view |
|
|
|
 |
Road King Custom Liner Set measuring 8(h)x21(l)x6(d) Read More....
$44.95 |
|
|
Tour Pack Liners |
SBL-203
Click pic for larger view |
|
|
|
 |
Standard Tour Pack Liner measuring 10(h)x18(l)x14(d) Read More....
$39.95 |
|
SBL-205
Click pic for larger view |
|
|
|
 |
Standard 'Chopped' Tour Pack Liner Set measuring 7(h)x18(l)x14(d) Read More....
$39.95 |
|
 |
Eliminate road
spray and keep you warmer without a bulky motorcycle
fairing! Excellent fit; installs easily on
motorcycle engine guard bar, highway bar or freeway
bar. |
|
|
Non-Studded |
SB-4420
Click pic for larger view |
|
Top
of Page |
|
 |
Snap on crash bar rain guards for Harley Davidson
1986-present Road Kings & Dressers; vinyl; set of two.
Read More....
$103.95 |
|
SB-4410
Click pic for larger view |
|
|
|
|
Snap on crash bar rain guards for Harley Davidson Softail & Fat Boy 1986 to 1999; vinyl; set of two.
Read More....
$103.95 |
|
SB-2020
Click pic for larger view |
| |
|
|
Snap on crash bar rain guards for Harley Davidson
Softail & Fat Boy 2000 to present; vinyl; set of two.
Read More....
$103.95 |
|
|
Chrome-Studded |
SB-4422
Click pic for larger view |
|
Top
of Page |
|
 |
Snap on crash bar rain guards for Harley Davidson
1986-present Road Kings & Dressers; vinyl w/Chrome Studs; set of two.
Read More....
$118.95 |
|
SB-2022
Click pic for larger view |
| |
|
|
Snap on crash bar rain guards for Harley Davidson
Softail & Fat Boy 2000 to present; vinyl w/Chrome Studs; set of two.
Read More....
$118.95 |
|
 |
- Shift and Brake
Control Kits
- Shift Linkages
|
 |
|
Shift and Brake
Control Kits |
The new bagger lower controls are designed for
style and comfort. The sleek heel-toe shifter is extended 1" on each end
for ease of shifting and maximum use of the floorboard. The brake arm
has also been extended and lowered. The new peg placement is comfortable
and functional. This kit includes a new spline shift kit and bullet toe
pegs. These lower controls all come in kits and include both the shift
and brake sides. |
|
WHTFL
Click pic for larger view |
These
control kits are designed to fit '97 and later "FL" touring models and '87-later softail models. |
|
 |
Flame Shift & Brake Control Kit (2 piece kit)
$359.95 |
|
WHTFSK
Click pic for larger view |
These
control kits are designed to fit '97 and later "FL" touring models and '87-later softail models. |
|
 |
Flame Skull Shift & Brake Control Kit (2 piece kit)
$419.95 |
|
WHTGC
Click pic for larger view |
These
control kits are designed to fit '97 and later "FL" touring models and '87-later softail models. |
|
 |
Gothic Shift & Brake Control Kit (2 piece kit)
$349.95 |
|
WHTTL
Click pic for larger view |
These
control kits are designed to fit '97 and later "FL" touring models and '87-later softail models. |
|
 |
Tribal Shift & Brake Control Kit (2 piece kit)
$349.95 |
|
| Shift Linkages |
Wicked Image Billet Shift
Linkages Feature Built-in Hardware and are built to length
for all stock HD models. Standard length is 12-1/4"
center-to-center on the mount holes. Standard linkages have
hardware on the opposing sides of the linkage. (-TC)
specifies hardware on the same side of the linkage for
1999-newer FL models. (-D) specifies 13-1/4" length linkage
for DYNA Wide Glide and custom applications. |
|
W-TL04
Click pic for larger view |
Hardware on
the same side of the linkage for 1999-newer FL models. 13-1/4" length
linkage for DYNA Wide Glide and custom applications. |
|
 |
Tribal II
Wicked Image Billet Shift Linkage with Built-in Hardware
$129.95 |
|
W-FL01
Click pic for larger view |
Hardware on
the same side of the linkage for 1999-newer FL models. 13-1/4" length
linkage for DYNA Wide Glide and custom applications. |
|
 |
Flame
Wicked Image Billet Shift Linkage with Built-in Hardware
$129.95 |
|
W-TL03
Click pic for larger view |
Hardware on
the same side of the linkage for 1999-newer FL models. 13-1/4" length
linkage for DYNA Wide Glide and custom applications. |
|
 |
Tribal
Wicked Image Billet Shift Linkage with Built-in Hardware
$129.95 |
|
W-TFS1
Click pic for larger view |
Hardware on
the same side of the linkage for 1999-newer FL models. 13-1/4" length
linkage for DYNA Wide Glide and custom applications. |
|
 |
Tribal, Flame, & Skulls
Wicked Image Billet Shift Linkage with Built-in Hardware
$159.95 |
|
W-TL05
Click pic for larger view |
Hardware on
the same side of the linkage for 1999-newer FL models. 13-1/4" length
linkage for DYNA Wide Glide and custom applications. |
|
 |
Tribal III
Wicked Image Shift Linkage with Built-in Hardware
$129.95 |
|
| |
